With the rapid development of laser technology, laser marking machines have also achieved rapid development. With the continuous expansion of market demand, various industries have more and more functional requirements for laser equipment. This forces laser equipment to be updated to meet people's needs. But do you know where the laser marking machine should not be used?

The control of the fiber laser marking machine is carried out according to the voltage signal. If the voltage used is unstable, a high voltage difference will occur, affecting the normal startup of the device. Even after normal startup, it will affect the stability of laser light emission. Most of the unstable voltage occurs when there is much large-scale equipment in use around, such as central air conditioners. We can use a multimeter to measure the actual voltage. The staff can check the voltage difference in a fixed time. If the voltage continues to be unstable, the operator can use a voltage stabilizer above 1KW for assistance.
 

The fiber laser marking machine belongs to optical equipment. Therefore, the dust in the environment will block the laser transmission process and affect the power of the device. We can adjust the working environment and try to put the equipment in a clean room. After the equipment is used, the staff should wipe the ergonomic lenses twice with alcohol and a clean cloth.
 

At present, most of the laser marking machines on the market work with air-cooled machines. If the working environment is higher than 40 degrees, the effect of using air cooling to reduce the temperature will have a great impact. Because if the temperature of the laser continues to rise, the power will continue to drop, which will affect the marking effect. If the temperature of the working environment reaches the peak of the device, the laser will stop working. If there is poor ventilation around the device, or there are devices that generate a lot of heat in the surrounding environment, etc. It is easier to cause the device temperature to be too high. Users can install a fan for a good cooling effect, or install an air conditioner to cool the machine.
 

The strong magnetic environment will cause deviation of the pointer of the fiber laser marking machine. Therefore, the machine will have inaccurate marking accuracy. the operator should avoid using it in a strong magnetic environment.

 
Conclusion
This article is an introduction to the environment where the fiber laser marking machine is not suitable. We must avoid the above points when using a fiber laser marking machine. Only in this way can the fiber laser marking machine work longer and more efficiently. If you want to know more about laser processing equipment, please continue to follow our website. In addition, you can also contact us directly via email and WhatsApp. Looking forward to hearing from you.