Main factors affecting the cutting process of fiber laser machine(1)

In the process of fiber laser cutting machine cutting, there are many factors that affect the cutting speed and cutting quality. These factors mainly include the purity of cutting oxygen, the flow rate of cutting oxygen, the flow rate and pressure, the shape of cutting oxygen flow, the cutting inclination angle, and the power of the hot flame, the composition and properties of the metal being cut.

We all know that cutting oxygen flow plays a leading role in the whole cutting process. On the one hand, it need to burn the metal, and on the other hand, it need to make the slag generated by the combustion blown off the slit. Therefore, some parameters related to the cutting oxygen flow, such as purity, flow rate, pressure and oxygen flow shape, are the main parameters affecting the cutting process. Today, follow me to learn it from 4 factors.

Cutting oxygen purity

The higher the purity of the cutting oxygen, the faster the combustion reaction speed, and the faster the cutting speed. If the oxygen purity is poor, not only the cutting speed is greatly reduced, the cutting quality is deteriorated, and the oxygen consumption is increased. For example, if the purity of oxygen is reduced from 99.5% to 98%, the cutting speed will decrease by 25%, and the oxygen consumption will increase by 50%. It is generally considered that the oxygen purity is less than 95%, and gas cutting cannot be performed. In fact, in you want to obtain a gas-cutting cut without slag, the oxygen purity needs to be above 99.5%.

Cutting oxygen flow

In order to complete the gas cutting, it is necessary to provide a sufficient amount of oxygen to the reaction. If the oxygen flow rate is insufficient, the metal cannot be fully burned. And it is easy to cause sticking, and the cutting speed is slow. However, If the oxygen flow rate is too sufficient, the metal cold zone will easily cause sticking of slag, and even cause insufficient preheating of the metal, which will interrupt the cutting.

As the oxygen flow rate increases, the cutting speed gradually increases. And it is good to have a good quality cut. If the oxygen flow rate beyond a certain limit, the cutting speed is reduced. Therefore, there is an optimum oxygen flow rate for the thickness of a certain steel plate. At this time, not only the cutting speed is the highest, but also the quality of the cut surface is good.

Above we have learned the effect of cutting oxygen purity and oxygen flow rate on the cutting process. In the next blog we will then analyze other factors such as cutting oxygen pressure, cutting flow shape, cutting angle and other factors on the cutting process, please follow us, we will continue to update the knowledge about fiber cutting machines. What we do is  just to let you know more about fiber laser cutting machines, and have a good cutting experience when using cutting machines.
 

Get Price & Details

Premium Related Products